The X-Tronic 3060 PRO was Mainly Manufactured for the Advanced User, as well as the Expert, but the Features of this Soldering Iron Station are Simple Enough to Understand and Program that an Amateur or Beginner will have No Problem using this Unit. This Soldering Station is one of the Finest Units that we have made so far and it will Definitely Exceed your Expectations with its Quality and Durability compared to Any Other Soldering Station in its Class.

The Model #3060-PRO is a Low Cost, but Very High Quality ESD Safe 75 Watt Anti-static Soldering Iron Station (60 Watts for the Soldering Iron & 15 Watts for the Soldering Iron Mother Board) with some Great Added Features. This unit Features 2 Blue LED Temperature Displays (One for Setting the Temperature and the other Showing the Real Temperature), 3 Programmable Presets for Soldering Iron Temperatures, an Adjustable Sleep Timer (0, 5, 10 & 30 Minutes) with Auto Cool Down, a Temperature Calibration Function and a C/F (Celsius/Fahrenheit) Switch. The Soldering Iron Features and Ergonomic Heat Resistant Grip and the Base Units Features a Slide Mounted Solder Roll Holder (Roll of Solder Not Included) a Brass Sponge Soldering Tip Cleaner with a Good Supply of Cleaning Flux and a Heat Resistant Chrome Coated Soldering Iron Holder with a Bakelite Inset to Stop Heat Transfer.

One of the New Features we have added to this Unit is a Set of 4 Each 10" Helping Hands that can Easily be Attached to the Soldering Station by Screwing them into the 4 Screw Ports on the Station. You will find these Very Helpful when working on Smaller PCB's that can be Propped Up right in front of your to work on. And, Believe it or Not, we have also included a Mini-Magnifying Lamp that you can Plug into the Main Power Unit to use when you are working with Smaller Components or just need Illuminate what you are working on.

This unit also Features a PID (Proportional-Integral-Derivative) Technology Program built into it which is commonly referred to as Magic Temperature Compensation Technology. This program cycles every 20 milliseconds to detect the actual temperature of the soldering iron's heating element/soldering tip and quickly corrects it with a rapid return to the correct set temperature. This Magic Temperature Compensation Technology also helps keep the soldering iron at a constant temperature no matter what type of job you are working on. This unit also has a Self Test Function with Full Intelligence on Over-Temps, Short Circuits and Overloads.

Included with this Unit is the Main 75 Watt Power Unit (60 Watts for the Soldering Iron & 15 Watts for the Soldering Iron Mother Board) with a Top Mount Soldering Iron Holder, a Very Comfortable Ergonomic Grip Soldering Iron, 5 Extra Sizes/Styles of Soldering Tips, a Side Mount Soldering Roll Holder, a Brass "Sponge" Soldering Tip Cleaner with a Good Supply of Cleaning Flux, a Wet Sponge, a Solder Sucker, a "Pocket Pack" Roll of 60-40 (Tin-Lead) Rosin Core Solder, a Stainless Steel Pinpoint Tweezers and an Anti-Static Grounding Alligator Clip (all shown in the 1st photo above).

The 2nd photo above shows the 4 Helping Hands attached and being used to hold a PCB in Front of the Soldering Station along with the Mini-Magnifying Lamp in Position.

A Closeup of the Double Digital LED Control Panel along with a Brushed Metal Control Knob, 3 Programmable Presets for the Temperature of the Soldering Iron and C/F (Celsius/Fahrenheit) Toggle Switch is shown in the 1st photo above. You might also notice that the Soldering Iron Holder, manufactured from Bakelite® (to prevent Heat Transfer) is Conveniently Mounted on the top of the X-Tronic 3060 unit. This makes the Soldering Iron more Easily Accessible to the user than a Separate Soldering Iron Holder not Attached to the Soldering Iron.

The 2nd photo above shows the 60 Watt Soldering Iron with a Very Comfortable Ergonomic Grip that comes with this unit. The Temperature Range of this Soldering Iron is 194°F~896°F/90°C~480°C with a Temperature Stability of ±3.6°F/2.0°C.

The 1st photo above shows the 5 Extra Sizes/Styles of Soldering Tips that also come with this unit. There is 1 of Each of the Following Sizes/Styles Included: 1 Each T-1, 1 Each T-B, 1 Each T-3C, 1 Each T-2.4D & 1 Each T-K. All Soldering Tips are manufactured from High Quality Copper and Coated with Nickel Chromed Alloys for Strengthening the Hardness of the Tips.

The 2nd photo shows the included 50 gram Roll of 60-40 Tin Lead Rosin Core Solder Wire. This Roll of Solder fits Very Nicely on the Side Solder Roll Holder that is attached to the side of the Soldering Station.

The Heat Resistant Silicone Tool/Parts Mat that comes with our X-Tronic 3060-PRO Soldering Station (shown in the 3rd photo above) measures 5-3/4" x 4-3/4".

There is also a Soldering Sucker Desoldering Pump included with this Complete Package (shown in the 1st photo above). This Toll has a Good Bit of Suction and its Simple Design allows Easy One Handed Use with its Compact and Light Weight Design.

The 2nd photo above shows the Precision Tweezers that also comes with this Unit. These Pinpoint Tweezers are made of Stainless Steel that is Anti-Static with a Non-Magnetic Baked on Paint used on the Surface which is Resistant to most Acids and other Corrosive Substances.

The 3rd photo above shows the Brass Sponge in the Cleaning Tin and this also includes a Good Supply of Solid Rosin Flux at the bottom of the tin for help with cleaning your soldering tips which we are sure you will Greatly Appreciate! There is also a Wet Sponge included with the package for further help with cleaning your tips.

A Special Feature that we have included with our X-Tronic 3060-PRO is a Goose-neck Mini-Magnifying Lamp (shown in the first photo above) that you can plug into the Main Unit to use when you are working with Small Components or just need some Light to Illuminate what you are working on. The Length of the Goose-neck on Mini-Mag Lamp measures 10" from the Middle of the Mag Lamp Lens to the Plug.

Also Included with the 3060-PRO are a Set of 4 Helping Hands that are 10" Long (shown in the 2nd photo above). These Helping Hands screw into the 4 Screw Ports on the soldering station and are Very Helpful when working on smaller PCB's to hold them right up in front of you. Of course, all 4 of these Helping Hands come with every unit, but it is Optional whether you attach them or not. There is a wrench included to tighten these to the unit securely.

Although the X-Tronic 3060 is ESD Safe, for further protection we have included an Anti-Static Grounding Alligator Clip (shown in the 3rd photo above). An Anit-Static Grounding Wire is a Safety Device used to channel Static Electricity to a Proper Ground while working on sensitive computer boards, mobile phone boards, etc. equipment or actually any PCB. Just plug it into the back of the soldering station and Clip it to the PCB you are working on.

This 3060-PRO Complete Kit is shipped directly from our X-Tronic Sales/Service/Distribution Center located here in Lincoln, Nebraska - USA!

This Complete X-Tronic 3060 Soldering Station Kit Includes:

1 - 75 Watt Soldering Iron Station (60 Watts for the Soldering Iron & 15 Watts for the Soldering Iron Mother Board)

1 - 60 Watt Soldering Iron with and Ergonomic Grip

5 - Extra Assorted Soldering Tips (1 Each T-1, 1 Each T-B, 1 Each T-3C, 1 Each T-2.4D & 1 Each T-K)

1 - Soldering Iron Holder manufactured from Bakelite® Mounted on the Top of the Soldering Station

1 - Solder Roll Holder mountable to the side of the Control Base Unit

4 - Helping Hands (10" Long) mountable to the 4 Ports on the Unit

1 - Goose-neck Mini-Magnifying Lamp ( 10" Long from the Middle of the Lens to the Plug)

1 - Anti-Static Grounding Alligator Wire Clip

1 - 50 Gram Roll of 60-40 (Tin-Lead) Rosin Core Solder

1 - Heat Resistant 100% Silicone Tool/Parts Mat

1 - Solder Sucker Desoldering Pump

1 - Precision Pinpoint Anti-Static Stainless Steel Tweezers

1 - Brass "Sponge" Tip Cleaner with a Good Supply of Cleaning Flux at the Bottom of the Tin

1 - Wet Sponge

1 - Complete Illustrated Users Manual

X-Tronic 3060 Soldering Station Product Specifications:

• ESD Safe
• Soldering Iron Station Output: 75 Watts
• Soldering Iron Output: 60 Watts
• 52 Inch 100% Silicone Soldering Iron Cord with Virtually No Memory
• 55 Inch Power Cord (from Control Unit to Wall Plug)
• PID (Proportional-Integral-Derivative) Technology Built into this Unit - often referred to as "Magic Temperature Compensation Technology"
• Temperature Range: 194°F~896°F/90°C~480°C
• Soldering Iron Temperature Stability: ±3.6°F/2.0°C
• Storage Environment: -68°F~176°F/-20°C~80°C
• Shipping Weight: 2 Lbs.
• Actual Unit Weight: 1.5 Lbs.
• AC 110V/120V - 60 Hz - NO 220V Available

Shipping & Handling is FREE to the 48 Contiguous United States via UPS Ground!

We also offer shipping to Alaska, Hawaii, Puerto Rico, Guam, Virgin Islands, APO/FPOs, and Canada. The cost will be calculated in your cart for your review BEFORE you pay. If you are unable to see shipping costs to your area, or if you have any questions regarding the cost, please contact us directly and we would be happy to quote a price for you.

3-Year Warranty

ALL X-Tronic USA Products come with a 30 Day Unconditional Money Back Guarantee and also come with a 3-Year Fix/Repair Warranty (Required Labor & Parts Covered)